Home  >  FAQ Punch Tap English

FAQ –  Questions and answers regarding the Punch Tap technology

 

What does the name Punch Tap mean?

  • The name Punch Tap is derived from the punch in professional boxing and characterizes the sudden plunge of the tool and the fast retraction.

How does a Punch Tap work?

  • It is a new production technology for internal threads which is also known as helical thread-forming.
  • When the tool plunges into the pre-drilled tap-hole, two helical grooves opposite each other are machined. By means of a 180° rotation the thread is cold-formed throughout the entire depth. The tool is now retracted from the thread through the two helical grooves.
  • Additional information concerning the functionality can be found on this microsite, in the product video or in the product brochure.

Who invented the new production technology and who developed the Punch Tap?

  • AUDI and EMUGE are the inventors and developers of the Punch Tap technology.

Is the Punch Tap available only from EMUGE?

  • Yes, only from EMUGE, both the process and the tool are patented.

What are the advantages of the Punch Tap?

  • Time savings which can result in cost reductions.
  • Energy savings.
  • Only one storage position is needed in the tool magazine.
  • The thread flank is produced in a cold-forming process.

How does the time advantage of the Punch Tap compare to a cold-forming tap in a synchronous machining cycle?

  • The time advantage in a synchronous cycle is up to 75%.

To which customers will the Punch Tap be of interest?

  • The Punch Tap will be of interest in particular to series manufacturers.

Which materials can a Punch Tap be used for?

  • In particular aluminum cast or wrought alloys and similar light metals.

On which machines can a Punch Tap be used?

  • On CNC machines with a Sync control system with available Punch Tap program.

Is the Punch Tap already in use in series production?

  • The mass production switchover with M6-6H at the AUDI plant in Györ/Hungary was in 2016.

What material is the Punch Tap made from?

  • It is made from a special HSSE-PM alloy with optimised wear- and toughness properties.

Can a Punch Tap be reground?

  • No.

Which design does the Punch Tap have?

  • Shank in h6 tolerance with lateral inclined clamping flat.
  • Dimensions according to EMUGE-standard depending on application.

Which type of tool holder does the Punch Tap require?

  • A special EMUGE Punch Tap (PT Synchro) holder is used.
  • Due to the specific process a rigid clamping is necessary.
  • In addition, the jerky movements and stress on tension and compression which affect torque, must be eliminated.
  • Conventional clamping systems are not suitable for these types of stress.

What type of holes can the Punch Tap be used for?

  • There is one basic tool for blind holes and through-holes.

Does the depth of thread change compared to conventionally produced threads?

  • In principle, there is no change but in blind holes a thread run-out of two to three threads are required.

What is the suitable preparatory diameter respectively tolerance?

  • Analogous to conventional thread forming.
  • It might be necessary to adjust preparatory diameter and tolerance.

How can you gauge the produced thread?

  • With conventional smooth tap hole gauges and Go/No-Go- thread plug gauges:
    • The thread is gauged with Go/No-Go thread plug gauge with tolerance 6H
    • The minor diameter with a smooth Go/No-Go plug gauge with tolerance 7H.
 

We look forward to supporting your initial set-up and the application of the tools.
Feel free to contact us at: info@punchtap.com