Programming example for zirconium oxide and PMMA / PEEK / wax

1. Roughing cavity side	2. Restmachining inside copings

Strategy: 3-Axes arbitrary stock roughing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax	Strategy: 3-Axes arbitrary stock roughing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax

3. Margin line finishing (step1)	4. Margin line finishing (step 2)

Strategy: 3-Axes equidistant finishing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax	Strategy: 3-Axes equidistant finishing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 1 mm Art. no.: 2600D.100616 Material: Zirconium oxide Art. no.: 2608R.100310 Material: PMMA / PEEK / wax

5. Finishing cavity side	6. Finishing outer areas cavity side

Strategy: 5-Axes boss finishing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 1 mm Art. no.: 2600D.100616 Material: Zirconium oxide Art. no.: 2608R.100312 Material: PMMA / PEEK / wax	Strategy: 3-Axes equidistant finishing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax

7. Roughing occlusal side	8. Finishing occlusal side

Strategy: 3-Axes arbitrary stock roughing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax	Strategy: 3-Axes equidistant finishing (hyperDENT^®) Tool: Solid carbide ball nose end mill, dia. 2 mm Art. no.: 2600D.200616 Material: Zirconium oxide Art. no.: 2608R.200312 Material: PMMA / PEEK / wax

9. Separating and reducing the connectors

Zirconium oxide and PMMA / PEEK / wax Separating and reducing the connectors

Please note:

In order to avoid unneccessary heat generation when machining PMMA and PEEK, cooling Emulsion should be used.

Zirkonium oxide should preferably be machined dry. Wax can be machined both dry and with coolant.

Strategy:   3-Axes freepath milling (hyperDENT^®)
Tool:          Solid carbide ball nose end mill, dia. 1 mm
Art. no.:      2600D.100616 Material: Zirconium oxide
Art. no.:      2608R.100310 Material: PMMA / PEEK / wax

Programming example for zirconium oxide and PMMA / PEEK / wax

FRANKEN GmbH & Co. KG